Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.

Was gemacht wurde

Systemtyp
MFC

Was funktioniert hat

Noch keine Ergebniskennzahlen extrahiert.

Zusammenfassung

In view of the current bottlenecks of low nitrogen and phosphorus removal efficiency and high cathode cost of microbial fuel cells (MFCs), this study constructed single-chamber biocathode MFCs to carry out related research. Single-chamber MFCs with microalgae were fabricated, and nitrogen removal efficiency and greenhouse gas emissions (GHG) were investigated. The results indicated that algae MFCs could significantly reduce GHG (CH4, CO2, and N2O) emissions through the competition of electron donor and sequestrating atmospheric CO2. Compared with the control group, the microalgal MFC significantly promoted the removal of total nitrogen (TN) and total phosphorus (TP). The highest open-circuit voltage (0.33 V) and power density (49 mW m⁻³) were observed in the closed circuit with algae (CC) reactor. Running MFC significantly increased the biomass of algae and produced good quality of biofuel. Quantitative polymerase chain reaction (q-PCR) analysis indicated that mcrA gene copies in the CC reactor (3.2×103 copies mL⁻¹) were significantly higher than those of the no algae (NA) and CC reactors, while the lowest denitrifying gene copies (narG, nirS, and nosZ) were observed in the NA reactor. The Chloroflexi (22%) and Proteobacteria (31%) were the predominant bacterial communities in the CC reactor. Geobacter and Desulfobulbus were the main genera of exoelectrogens. This study can provide reference for nutrients (nitrogen, phosphorus) removal and GHG control in MFC wastewater treatment, but its long-term stability needs to be further studied.

Schlagwörter

Microbial fuel cellPhosphorusBiofuelAlgaePulp and paper industryNitrogen

Kennungen

Zeitschrift
Journal of Environmental Engineering
Jahr
2023
Generische MFCRepräsentatives Modell
Klicken, um die Strömung zu animieren
3D-Modell wird geladen …

Repräsentatives Modell: MFC – zugeordnet nur anhand des Systemtyps der Publikation, nicht ihres Reaktors oder ihrer Geometrie.

Extraktion

Berichtete Parameter

Aus dieser Publikation wurden noch keine Werte extrahiert.

Öffnen Sie das Modell im Labor, um alle Steuerelemente, die Parameterbearbeitung und Vorlagen-Overlays zu nutzen.

Im Labor öffnen →