Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.

KI-Zusammenfassung

70 % Konfidenz

This study investigated the effect of nitrate and sulfate on mediator-less microbial fuel cells (MFCs) and found that both chemicals inhibit power production, with stronger inhibition at higher concentrations.

Erstellt von der MESSAI-Extraktionspipeline · mit dem Quell-PDF abgleichen

Was gemacht wurde

Systemtyp
MFC

Was funktioniert hat

Noch keine Ergebniskennzahlen extrahiert.

Zusammenfassung

Microbial fuel cells (MFCs) simultaneously provide waste treatment while capturing energy in the form of electricity. Although these devices are being used in engineered and natural environments where nitrate or sulfate may inhibit power production, the effects of these electron acceptors have not been fully explored. This research investigated the effect of nitrate and sulfate on MFC power production when these chemicals are present at the anode. Nitrate decreased the maximum current and power density by 15 and 17%, respectively, when present at 20 mg/L, and sulfate caused the maximum current and power density to decrease by 4 and 7%, respectively (also at 20 mg/L). Stronger inhibition was observed at higher nitrate and sulfate concentrations, but power production persisted. Coulombic efficiency decreased as nitrate and sulfate levels increased, although this was not primarily due to the biochemical reduction of nitrate or sulfate; rather, it was probably because of the inhibition of exoelectrogens.

Zentrale Ergebnisse

  • Nitrate decreased maximum current and power density by 15% and 17% at 20 mg/L, respectively.
  • Sulfate decreased maximum current and power density by 4% and 7% at 20 mg/L, respectively.
  • Coulombic efficiency decreased with increasing nitrate and sulfate levels due to inhibition of exoelectrogens.

Schlagwörter

NitrateSulfateMicrobial fuel cellAnodeElectron acceptorEnvironmental chemistry

Kennungen

Zeitschrift
Water Environment Research
Jahr
2009
Generische MFCRepräsentatives Modell
Klicken, um die Strömung zu animieren
3D-Modell wird geladen …

Repräsentatives Modell: MFC – zugeordnet nur anhand des Systemtyps der Publikation, nicht ihres Reaktors oder ihrer Geometrie.

Extraktion

Berichtete Parameter

Aus dieser Publikation wurden noch keine Werte extrahiert.

Öffnen Sie das Modell im Labor, um alle Steuerelemente, die Parameterbearbeitung und Vorlagen-Overlays zu nutzen.

Im Labor öffnen →