Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.

KI-Zusammenfassung

70 % Konfidenz

A novel tiered constructed wetland system integrated with a microbial fuel cell (MFC) was developed to improve sustainability, achieving improved COD and nitrogen removal efficiencies despite a decline in MFC performance.

Erstellt von der MESSAI-Extraktionspipeline · mit dem Quell-PDF abgleichen

Was gemacht wurde

Systemtyp
MFC

Was funktioniert hat

Noch keine Ergebniskennzahlen extrahiert.

Zusammenfassung

To improve the sustainability of constructed wetlands (CWs), a novel tiered wetland system integrated with a microbial fuel cell (MFC) was developed in this study. Compared to the single stage CW, chemical oxygen demand (COD) removal efficiency was improved from 83.2% to 88.7%. More significantly, this tiered system significantly enhanced total nitrogen removal efficiency (an increase from 53.1% to 75.4%). In terms of MFC integration, a gradually decreased performance in electricity production was observed during its 3 months of operation (the voltage dropped from nearly 600 mV to less than 300 mV), which resulted in a reduction of power density from around 2 W/m³ to less than 0.5 W/m³. The deterioration in performance of the air-cathode is the main reason behind this, since the electrode potential of the cathode under open circuit reduced from 348.5 mV to 49.5 mV while the anode potential kept constant at around −400 mV. However, in spite of its electrical performance reduction, it was proved that MFC integration enhanced COD removal and the nitrification process. Further work is needed to improve the stability and feasibility of this new system.

Zentrale Ergebnisse

  • [object Object]
  • [object Object]
  • [object Object]

Schlagwörter

Microbial fuel cellNutrientWetlandConstructed wetlandWaste managementEnvironmental engineering

Kennungen

Zeitschrift
Water Science and Technology
Jahr
2017
Generische MFCRepräsentatives Modell
Klicken, um die Strömung zu animieren
3D-Modell wird geladen …

Repräsentatives Modell: MFC – zugeordnet nur anhand des Systemtyps der Publikation, nicht ihres Reaktors oder ihrer Geometrie.

Extraktion

Berichtete Parameter

Öffnen Sie das Modell im Labor, um alle Steuerelemente, die Parameterbearbeitung und Vorlagen-Overlays zu nutzen.

Im Labor öffnen →