MESSAI.iO

Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.

KI-Zusammenfassung

70 % Konfidenz

Denitrifying microbial fuel cells perform optimally at specific pH ranges and COD concentrations, with implications for pollutant removal and electricity generation.

Erstellt von der MESSAI-Extraktionspipeline · mit dem Quell-PDF abgleichen

Was gemacht wurde

Systemtyp
MFC

Was funktioniert hat

Noch keine Ergebniskennzahlen extrahiert.

Zusammenfassung

The effects of pH, chemical oxygen demand (COD) concentration and external resistance on denitrifying microbial fuel cell were evaluated in terms of electricity generation characteristics and pollutant removal performance. The results showed that anodic influent with weakly alkaline or neutral pH and cathodic influent with weakly acidic pH favored pollutant removal and electricity generation. The suitable influent pH of the anode and cathode were found to be 7.5–8.0 and 6.0–6.5, respectively. In the presence of sufficient nitrate in the cathode, higher influent COD concentration led to more electricity generation and greater pollutant removal rates. With an anodic influent pH of 8.0 and a cathodic influent pH of 6.0, an influent COD concentration of 400 mg/L was deemed to be appropriate. Low external resistance favored nitrate and COD removal. The results suggest that operation of denitrifying microbial fuel cell at a lower external resistance would be desirable for pollutant removal but not electricity generation.

Zentrale Ergebnisse

  • Anodic influent with weakly alkaline or neutral pH and cathodic influent with weakly acidic pH favor pollutant removal and electricity generation.
  • Higher influent COD concentration leads to more electricity generation and greater pollutant removal rates in the presence of sufficient nitrate.
  • Low external resistance favors nitrate and COD removal, but may not be desirable for electricity generation.

Schlagwörter

Denitrifying bacteriaMicrobial fuel cellPollutantChemical oxygen demandNitrateEnvironmental chemistry

Kennungen

DOI
10.2166/wst.2013.250
Zeitschrift
Water Science and Technology
Jahr
2013
Generische MFCRepräsentatives Modell
Klicken, um die Strömung zu animieren
3D-Modell wird geladen …

Repräsentatives Modell: MFC – zugeordnet nur anhand des Systemtyps der Publikation, nicht ihres Reaktors oder ihrer Geometrie.

Extraktion

Berichtete Parameter

3 extrahierte Werte

Extrahierte Werte ansehen

Öffnen Sie das Modell im Labor, um alle Steuerelemente, die Parameterbearbeitung und Vorlagen-Overlays zu nutzen.

Im Labor öffnen →