Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.

Was gemacht wurde

Systemtyp
MFC

Was funktioniert hat

Noch keine Ergebniskennzahlen extrahiert.

Zusammenfassung

To construct a simultaneous nitrification and denitrification-microbial fuel cell (SND-MFC) reactor for stable electricity generation, a heterotrophic nitrification-aerobic denitrification strain was isolated and purified from aerobic activated sludge from a sewage treatment plant. The strain with an optimal nitrogen removal performance, which was identified as Pseudomonas , was inoculated into the SND-MFC as a single strain. Different electrode materials and electrode distances (EDs) were investigated. The results showed that a maximum ammonium removal rate of 92.31% and a maximum power density of 134.28 mW/m 3 were obtained by the SND-MFC using graphene film as the electrodes material. Decreasing the ED did not significantly improved the power generation performance of the pure strain SND-MFC at the initial stage. When the electrode distance of the SND-MFC was 4 cm, the best generation efficiency was achieved with a maximum power density of 151.84 mW/m 3 .

Schlagwörter

Microbial fuel cellDenitrificationHeterotrophNitrificationAerobic denitrificationActivated sludge

Kennungen

PubMed
34346854
Zeitschrift
Environmental Technology
Jahr
2021
Generische MFCRepräsentatives Modell
Klicken, um die Strömung zu animieren
3D-Modell wird geladen …

Repräsentatives Modell: MFC – zugeordnet nur anhand des Systemtyps der Publikation, nicht ihres Reaktors oder ihrer Geometrie.

Extraktion

Berichtete Parameter

Aus dieser Publikation wurden noch keine Werte extrahiert.

Öffnen Sie das Modell im Labor, um alle Steuerelemente, die Parameterbearbeitung und Vorlagen-Overlays zu nutzen.

Im Labor öffnen →