Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.
Adapting a denitrifying biocathode for perchlorate reduction
Caitlyn Shea, Peter Clauwaert, Willy Verstraete, Robert Nerenberg
KI-Zusammenfassung
90 % KonfidenzMFC research in microbial, treatment. Perchlorate is widely used as a propellant in the aerospace and defense ...
Erstellt von der MESSAI-Extraktionspipeline · mit dem Quell-PDF abgleichen
Was gemacht wurde
- Systemtyp
- MFC
Was funktioniert hat
Zusammenfassung
Perchlorate is widely used as a propellant in the aerospace and defense industries, and is of environmental concern due to its high mobility and inhibiting effect on thyroid function. An ideal treatment approach is bioreduction to chloride via dissimilatory perchlorate-reducing bacteria (PCRB). PCRB are ubiquitous in the environment, and are mainly facultative anaerobes and denitrifiers. Previous research suggests that PCRB may grow using a cathode as an electron donor, although this research was performed in a half cell with exogenous electron shuttles. We investigated a functioning MFC with a denitrifying biocathode for perchlorate reduction, as a means to confirm the existence of biocathode-utilizing PCRB and the possibility of perchlorate remediation without added shuttles. The biocathode was initially run with 20 mgN/L nitrate. The perchlorate concentration was increased stepwise from 0.1 mg/L to 20 mg/L, while the nitrate concentration was decreased from 20 mgN/L to 5 mgN/L. The maximum perchlorate removal was 12 mg/L-d, contributing 64% to the 0.28 mA produced by the cell. Given the lack of soluble electron donor in the medium, the extent of perchlorate reduction, and the improvement of perchlorate reduction over time, these tests strongly suggest PCRB are utilizing the cathode as an electron donor without exogenous electron shuttles.
Schlagwörter
Kennungen
- Zeitschrift
- Water Science and Technology
- Jahr
- 2008
Repräsentatives Modell: MFC – zugeordnet nur anhand des Systemtyps der Publikation, nicht ihres Reaktors oder ihrer Geometrie.
Öffnen Sie das Modell im Labor, um alle Steuerelemente, die Parameterbearbeitung und Vorlagen-Overlays zu nutzen.
Im Labor öffnen →