Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.

Was gemacht wurde

Systemtyp
MFC

Was funktioniert hat

Noch keine Ergebniskennzahlen extrahiert.

Zusammenfassung

• ABR-MFC reactor efficiently treated low concentrations of 2,4-DTBP. • Power generation diminished as 2,4-DTBP concentration increased. • Proteobacteria and Nitrospirota decreased with increasing 2,4-DTBP. • 2,4-DTBP adversely impacted nitrogen metabolism of ABR-MFC reactor. 2,4-Di- tert -butylphenol (2,4-DTBP), a recalcitrant phenolic pollutant, poses a certain ecological risks due to its widespread industrial use. This study investigated the response of an anaerobic baffle reactor-microbial fuel cell (ABR-MFC) system to 2,4-DTBP in wastewater. Results showed that the ABR-MFC achieved > 99 % removal of 2,4-DTBP at low concentrations (1–2 mg/L). However, increasing 2,4-DTBP to 5 mg/L caused functional declines: ammonia–nitrogen removal reduced to 82.88 %, and power generation efficiency decreased (compartment1 resistance surged from 1282.2 Ω to 8068.4 Ω). Microbial analysis revealed that elevated 2,4-DTBP shifted community structure (increased Bacteroidota, decreased Proteobacteria/Nitrospirota) and enriched potential degraders ( Leptolinea and Syntrophorhabdus ). Functional predictions linked 2,4-DTBP stress to inhibited nitrogen cycling, with reduced abundance of nitrification ( amoA ) and denitrification genes ( nosZ , nirK/S ), suggesting incomplete denitrification. Path modeling further confirmed that 2,4-DTBP impaired nitrogen metabolism and bioelectrochemical stability despite enhancing microbial diversity. These findings provide critical insights for optimizing bioelectrochemical systems treating 2,4-DTBP contaminant.

Schlagwörter

Microbial fuel cellBaffleWastewaterMicrobial population biologyAnaerobic exerciseWaste management

Kennungen

Zeitschrift
Separation and Purification Technology
Jahr
2025
Generische MFCRepräsentatives Modell
Klicken, um die Strömung zu animieren
3D-Modell wird geladen …

Repräsentatives Modell: MFC – zugeordnet nur anhand des Systemtyps der Publikation, nicht ihres Reaktors oder ihrer Geometrie.

Extraktion

Berichtete Parameter

Aus dieser Publikation wurden noch keine Werte extrahiert.

Öffnen Sie das Modell im Labor, um alle Steuerelemente, die Parameterbearbeitung und Vorlagen-Overlays zu nutzen.

Im Labor öffnen →