Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.

KI-Zusammenfassung

70 % Konfidenz

MFC research paper focusing on power density, coulombic efficiency, biofilm

Erstellt von der MESSAI-Extraktionspipeline · mit dem Quell-PDF abgleichen

Was gemacht wurde

Systemtyp
MFC

Was funktioniert hat

Coulomb-Effizienz27,5%

Zusammenfassung

Sidestream wastewater was used to maintain autotrophic nitrogen removal in mobile pilot-scale (3 m³ process tanks) reactor configurations -deammonification in biofilm. Biofilms were developed after adaption of biomass on carriers with undiluted liquid effluent of municipal wastewater treatment plant biogas facility. The highest total nitrogen removal rate (TNRR) was achieved in the deammonification biofilm reactor (0.33 kg-N m-3 d-1). Time-based and concentration-based (optimal dissolved oxygen (DO) concentration was 0.3-0.8 mg O2 L⁻¹) aeration control proved reliable when reject water characteristics were relatively stable. The biofilm from deammonification biofilm reactor was then tested in microbial fuel cell (MFC) technology in order to understand the exo-electrogenic behavior of it. Two MFCs with the biofilm (Test) and another one with septic tank mix consortia as control (Control) were observed to be capable of generating continuous bio-energy with operating voltage of 262 ± 17 mV and 163 ± 18 mV for Test and Control, respectively. Test (9.5 W.m⁻³) showed almost two times higher volumetric power density than Control (4.9 W.m⁻³) with lower internal resistance of 161 Ω than that of Control (386 Ω). The coulombic efficiency was also found to be higher in case of Test (27.5 ± 1.7 %) than Control (17.7 ± 1.9 %), demonstrating the applicability of ANAMMOX in MFC to achieve efficient wastewater treatment as well as higher energy recovery from MFC. Proper ORP range for biofilm ANAMMOX operation was -200 mV-0 mV.

Schlagwörter

NitrogenPulp and paper industryProcess engineeringBiochemical engineering

Kennungen

Zeitschrift
Unbekannte Zeitschrift
Jahr
2018
Generische MFCRepräsentatives Modell
Klicken, um die Strömung zu animieren
3D-Modell wird geladen …

Repräsentatives Modell: MFC – zugeordnet nur anhand des Systemtyps der Publikation, nicht ihres Reaktors oder ihrer Geometrie.

Extraktion

Berichtete Parameter

Öffnen Sie das Modell im Labor, um alle Steuerelemente, die Parameterbearbeitung und Vorlagen-Overlays zu nutzen.

Im Labor öffnen →