Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.

Was gemacht wurde

Systemtyp
MES

Was funktioniert hat

Noch keine Ergebniskennzahlen extrahiert.

Zusammenfassung

Microbial Electrochemical Fluidized Bed Reactors (ME-FBR) represent a new concept for promoting proper bacteria-electrode interaction and eventually efficient biocatalysis in Microbial Electrochemical Technologies (METs). In the current work we demonstrate how a fluidized cathode, a dynamic and discontinuous design of electrode, can be an effective electron donor for electroactive hydrogen-generating and nitrate reducing bacteria. Furthermore, the oxygen produced in the anodic reaction promoted ammonium oxidation to nitrate by nitrifying bacteria thus expanding the environmental applications of the system. By coupling both anodic and cathodic reactions, it was possible to simultaneously achieve nitrification–denitrification within one chamber and without external oxygen addition. Our proof-of-concept revealed the removal of 98% ammonium and ca. 29% of total nitrogen (31 g-N m−3reactor d−1) from an effluent with low organic matter under continuous mode. This study reveals for first time how fluidized beds can be integrated in METs not only as anodes but also as cathodes, broadening the opportunities and applications to bioremediation and bioelectrosynthesis processes.

Schlagwörter

Fluidized bedCathodeAnodeDenitrificationMicrobial fuel cellNitrifying bacteria

Kennungen

Zeitschrift
Electrochemistry Communications
Jahr
2020
Mikrobielles elektrochemisches SystemRepräsentatives Modell
Klicken, um die Strömung zu animieren
3D-Modell wird geladen …

Repräsentatives Modell: mikrobielles elektrochemisches System – zugeordnet nur anhand des Systemtyps der Publikation, nicht ihres Reaktors oder ihrer Geometrie.

Extraktion

Berichtete Parameter

Aus dieser Publikation wurden noch keine Werte extrahiert.

Öffnen Sie das Modell im Labor, um alle Steuerelemente, die Parameterbearbeitung und Vorlagen-Overlays zu nutzen.

Im Labor öffnen →